How to replace the filter of BRISE C200
Please choose replacement of filter type
Pre-filter
Main-filter
How to replace Breathe Bio Pre-filter of C200
1. Power off and unplug the device
2. Open the front cover
Pull out the front cover
3. Attach dustproof sticker
Attach a dustproof sticker to the front filter to prevent dust from flying when the filter is removed
If the filter is completely new, skip step 3 and directly remove Carbon pre-filter without attaching dustproof sticker. Keep the removed Carbon pre-filter for later use.
4. Remove the old filter
a. Take out the filter from device
b. Place the filter on a flat surface, gently remove the pre-filter, and remove the dustproof sticker with the old pre-filter
5. Replace with new pre-filter
Put the new Breathe Bio pre-filter to the velcro on the main filter
6. Install new filter
※ Make sure the filter is installed in the right direction
a. Insert the filter into the device in the direction of the arrow shown in the figure
b. Put back the front cover
7. Reset filter lifetime
After the replacement is completed and the front cover is put back, wait for the WiFi to reconnect.
And open BRISE APP to reset filter life or long press “
” device filter indicator for 5 seconds
Reset filter lifetime in BRISE app:
a. Enter the BRISE APP device page, click the “
” filter button to enter the filter page.
b. click PRE FILTER “Reset”，select「Breathe Bio」
complete.
How to replace Breathe Carbon Pre-filter of C200
1. Power off and unplug the device
2. Open the front cover
Pull out the front cover
3. Attach dustproof sticker
Attach a dustproof sticker to the front filter to prevent dust from flying when the filter is removed
4. Remove the old filter
a. Take out the filter from device
b. Place the filter on a flat surface, gently remove the pre-filter, and remove the dustproof sticker with the old pre-filter
5. Replace with new pre-filter
Put the new Breathe Carbon pre-filter to the velcro on the main filter
6. Install new filter
※ Make sure the filter is installed in the right direction
a. Insert the filter into the device in the direction of the arrow shown in the figure
b. Put back the front cover
7. Reset filter lifetime
After the replacement is completed and the front cover is put back, wait for the WiFi to reconnect.
And open BRISE APP to reset filter life or long press “” device filter indicator for 5 seconds
Reset filter lifetime in BRISE app:
a. Enter the BRISE APP device page, click the “” filter button to enter the filter page.
b. click PRE FILTER “Reset”，select「Breathe Carbon」
complete.
How to replace Breathe Combo Main-filter of C200
1. Power off and unplug the device
2. Open the front cover
Pull out the front cover
3. Attach dustproof sticker
Attach a dustproof sticker to the front filter to prevent dust from flying when the filter is removed
4. Remove the old filter
Take out the filter from device
5. Install new filter
※ Make sure the filter is installed in the right direction
a. Insert the filter into the device in the direction of the arrow shown in the figure
b. Put back the front cover
6. Reset filter lifetime
After the replacement is completed and the front cover is put back, wait for the WiFi to reconnect.
And open BRISE APP to reset filter life or long press “” device filter indicator for 5 seconds
Reset filter lifetime in BRISE app:
a. Enter the BRISE APP device page, click the “” filter button to enter the filter page.
b. click PRE FILTER “Reset”，select「Breathe Carbon」
c. click MAIN FILTER “Reset”，select「Breathe Combo」
complete.
How to replace Breathe Odors Main-filter of C200
1. Power off and unplug the device
2. Open the front cover
Pull out the front cover
3. Attach dustproof sticker
Attach a dustproof sticker to the front filter to prevent dust from flying when the filter is removed
4. Remove the old filter
Take out the filter from device
5. Install new filter
※ Make sure the filter is installed in the right direction
a. Insert the filter into the device in the direction of the arrow shown in the figure
b. Put back the front cover
6. Reset filter lifetime
After the replacement is completed and the front cover is put back, wait for the WiFi to reconnect.
And open BRISE APP to reset filter life or long press “” device filter indicator for 5 seconds
Reset filter lifetime in BRISE app:
a. Enter the BRISE APP device page, click the “” filter button to enter the filter page.
b. click PRE FILTER “Reset”，select「Breathe Carbon」
c. click MAIN FILTER “Reset”，select「Breathe Odors」
complete.
